How To Change The Ink Cartridge On A Canon Pixma. Make sure that the power is turned on, open the front cover (c), then open the paper output tray (d). (2) remove the orange protective cap (c) from the bottom of the ink tank as indicated in the figure below.
(1) take a new ink tank out of its package. Open the scanning unit / cover. Do not touch the ink cartridge holder until it stops completely.
When ink runs out, replace the fine cartridge immediately with a new one. To refill ink cartridges, you will require a 30 cc syringe with a needle,. Replace or reseat ink cartridges.
Discard the protective cap once it is removed. Hold down the power key and open the cartridge door. Canon mg3650 reset ink level.
If you get a notice that the ink cartridge is out, you can still print for a short time. Now it is time to install the new cartridges. The paper output tray (d) opens.
Do not hold the ink cartridge holder to stop or move it forcibly. Make sure that the power is turned on. Turn the printer on and open the front cover (c).
Don't touch the cartridge holder until it stops. The cartridge holder (e) moves to the replacement position. The color fine cartridge should be installed into the left slot and the black fine cartridge should be installed into the right slot.
Comments
Post a Comment